ABB creates world’s first medium voltage, speed-controlled motor concept

 

ABB’s MV Titanium concept is the world’s first medium-voltage (MV), speed controlled, industrial motor, in the 1-to-5-megawatt (MW) range that brings connectivity and control features in an easy to specify and install package.

The company says the all-in-one concept brings the benefits of energy efficiency to MV motor-driven processes, which today account for 10% of the world’s electricity.

ABB MV Titanium
ABB MV Titanium

“Energy efficiency measures of speed-controlled motors have gained significant traction in small size motors, for low voltage applications. But large motors have so far been left behind, due to initial cost and complexity, with only 10-15 percent currently connected to a drive,” says Heikki Vepsäläinen, President of ABB Large Motors and Generators. “But that is set to change with our new MV Titanium concept that makes it cost-effective and straightforward to install a suitable matched motor, with increased control, monitoring, and connectivity in a single package. It is the right upgrade solution for existing direct-on-line motors. And the potential savings in energy costs and CO2 emissions are huge – if we retrofitted the entire installed base, it would be like taking just over 1000 coal-fired power stations offline.”

In this pursuit, ABB has developed the MV Titanium concept to address the main perceived obstacles related to installing a drive with a large motor. These include not only the initial cost of a separate drive, but also its associated electrical house (e-house), transformers, switchgear and cabling that multiply the capital cost and increase the complexity of installation, especially on existing sites where space is at a premium. In addition to these savings, it will also provide OPEX savings due to the energy efficiency it will provide.

The next-generation concept has been built on ABB’s 140 years of motor design and 50 years of drives technology experience to create a solution that integrates energy efficiency, controllability, and connectivity into a single package. Furthermore, it has intelligence built in, with analytical and connectivity capabilities so it can seamlessly integrate into existing systems, as well as providing software libraries and interfaces for process monitoring and optimization.

The MV Titanium motors are intended for use with pumps, compressors, and fans as typical applications, where they could reduce energy consumption by up to 40 percent as well as enhancing productivity and minimizing downtime. They will be used across a wide range of sectors including power and renewables, processing, mining, cement, and water.

Heikki Vepsäläinen concludes: “Beyond its technical progress, this next-generation motor concept represents a significant step towards productivity in a low carbon world. It puts ABB well on the road to support changing large, fixed speed motors to fully electrically controlled motors, one by one.”

SourceABB

NEWS CATEGORIES

LATEST NEWS

Landmark case sees Dŵr Cymru Welsh Water fined £1.35m for over 800 breaches to sewage discharge permits

Dŵr Cymru Welsh Water has been fined £1,350,000 and ordered to pay £70,237.70 costs after pleading guilty to over 800 breaches of its environmental...

All of Scotland now at some level of water scarcity

The Scottish Environment Protection Agency (SEPA) has said that all of Scotland is now at some level of water scarcity alert, following a drier...

UK Centre for Ecology & Hydrology monthly hydrological outlook highlights very low levels of rainfall across Britain

The UK Centre for Ecology & Hydrology (UKCEH) has just published its monthly Hydrological Outlook at hydoutuk.net. The UKCEH reports that rainfall across much of...

CMA recommends making Ofwat’s price control decisions subject to appeals, rather than a redetermination process

The Competition and Markets Authority (CMA) is recommending making Ofwat’s price control decisions subject to appeals, rather than a redetermination process, and that the...